LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Cavalier Base, 4D Sedan, L61/KL6 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments & Inspections >> Drum Brake System >> Drum Brake Adjusting Hardware Inspection

Drum Brake Adjusting Hardware Inspection

  1. Visually inspect the adjuster actuator spring for the following conditions:
    • Excessive stretching, twisting, or binding.
    • The spring being bent, or broken at any point along the spring.
    • Excessive corrosion.
    • Missing
  2. Visually inspect the adjuster assembly for the following conditions:
    • The adjuster being bent, or broken.
    • Excessively worn, damaged, or missing teeth.
  3. Visually inspect the adjuster actuator lever for the following conditions:
    • The lever being bent, or broken.
    • The lever to adjuster surface being excessively worn.
    • Broken spring attachment tab.
    • Missing.
  4. If any of the conditions listed were found, the affected part, or parts require replacement.
scientia non olet · About LEMON Manuals