LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Cavalier Base, 4D Sedan, L61/KL6 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Striker Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

  1. Install the striker (3) to the I/P carrier (1).
  2. Install the screws (2) to the striker (3).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Adjust the striker (3) for proper alignment to the I/P compartment.

    Tighten 

    Tighten the screws to 2.3 N.m (20 lb in).

  4. Install the I/P trim pad. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) (CHEVROLET)  or TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) (PONTIAC)  .
    Fig 1: Locating Screws Holding Compartment Striker To I/P Carrier
    G01559238Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals