LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Avalanche 2500, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

  1. Remove the I/P cluster trim plate bezel. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER  .
    Fig 1: Removing Instrument Panel Cluster Trim Plate Bezel
    G01458105Courtesy of GENERAL MOTORS CORP.
  2. Remove the knee bolster screws.
  3. Unsnap the top of the knee bolster from the I/P assembly.
    Fig 2: Removing Top Knee Bolster From Instrument Panel Assembly
    G01458106Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals