LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Avalanche 2500, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel (I/P) Harness Replacement >> Installation Procedure

Installation Procedure

  1. Install the I/P harness to the vehicle.
  2. Install the harness grommet to the cowl.
  3. Connect the wire harness to the hood, if equipped with underhood camp.
  4. Connect the electrical harness from the underhood electrical center.
  5. Install the driver's side seat, if equipped with power. Refer to SEAT REPLACEMENT - FRONT BUCKET
  6. Install the driver's side hinge pillar trim panel. Refer to TRIM PANEL REPLACEMENT - HINGE PILLAR in INTERIOR TRIM . .
  7. Install the I/P carrier. Refer to INSTRUMENT PANEL (I/P) CARRIER REPLACEMENT  .
    Fig 1: Installing Instrument Panel Harness To Vehicle
    G01458202Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals