LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Avalanche 2500, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Cupholder Replacement (Luxury) >> Installation Procedure

Installation Procedure

  1. Place the cupholder assembly over the console.
  2. Connect the wire connector to the cupholder assembly.
  3. Push on the corners of the cupholder assembly till all the retaining clips (2) are seated.
  4. Install the upper trim bezel. Refer to BEZEL REPLACEMENT - FLOOR CONSOLE (NON-LUXURY UPPER)  or BEZEL REPLACEMENT - FLOOR CONSOLE (LUXURY UPPER)  or BEZEL REPLACEMENT - FLOOR CONSOLE (NON-LUX LOWER)  .
    Fig 1: Installing Cupholder Into Console - Luxury
    G01458138Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals