Removal Procedure

Remove the cluster bezel. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER .
Remove the upper bezel by inserting a flat bladed tool between the console and bezel.

Fig 1: Removing Upper Bezel - Non-Lux Lower
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connectors (1, 2).
Remove the storage bin. Refer to CONSOLE STORAGE BIN REPLACEMENT (EXPECT PRO) .

Fig 2: Disconnecting Electrical Connectors - Non-Lux Lower
Courtesy of GENERAL MOTORS CORP.
Insert a flat bladed tool between the console and bezel in order to pry it out.
Remove the bezel from the console.

Fig 3: Removing Bezel From Console - Non-Lux Lower
Courtesy of GENERAL MOTORS CORP.