LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Passenger Extended >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Pad Replacement - IP Upper >> Installation Procedure

Installation Procedure

  1. Align the locating pins and the retainers from the upper trim panel to the slots in the IP.
  2. Install the DRL ambient light sensor. Refer to DAYTIME RUNNING LAMPS (DRL) AMBIENT LIGHT SENSOR .
  3. If equipped, install the sun load sensor.
    Fig 1: Installing DRL Ambient Light Sensor
    G01813409Courtesy of GENERAL MOTORS CORP.
  4. Push forward and down on the upper trim panel to lock into place.
  5. Install the windshield garnish molding. Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILL .
    Fig 2: Installing Windshield Garnish Molding
    G01813410Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals