LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Passenger Extended >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> IP Harness Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel. Refer to IP Assembly Replacement .
  2. Pull on the wiring harness (2) in order to release the retainers.
  3. Remove the wiring harness (2).
    Fig 1: Removing Wiring Harness & Retainers
    G01813436Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals