LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Passenger Extended >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> IP Harness Replacement >> Installation Procedure

Installation Procedure

  1. Align the wiring harness retainers.
  2. Push in on the wiring harness (2) until the harness is secure.

    Important:  Ensure that the electrical connectors are routed correctly through the instrument panel.

  3. Install the instrument panel. Refer to IP Assembly Replacement .
    Fig 1: Installing Wiring Harness & Retainers
    G01813437Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals