LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Passenger Extended >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Hood Release Lever Replacement >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster. Refer to Knee Bolster Replacement .
  2. Remove the bolts/screws from the hood release handle.
  3. Remove the hood release handle from the instrument panel.
    Fig 1: Removing Bolts/Screws From Hood Release Handle
    G01813387Courtesy of GENERAL MOTORS CORP.
  4. Use a small, flat-bladed tool in order to remove the hood release cable grommet from the brake pedal bracket plate.
  5. Remove the hood release cable from the hood latch.
  6. Route the hood release cable from the brake pedal bracket plate.
  7. Remove the hood release cable and hood release handle from the vehicle.
    Fig 2: Removing Hood Release Cable & Hood Release Handle
    G01813388Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals