LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Passenger Extended >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement (Oldsmobile) >> Installation Procedure

Installation Procedure

  1. Install the outside ambient air temperature sensor to the vehicle.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the outside ambient air temperature sensor to radiator (1) support bolt.

    Tighten 

    Tighten the bolt to 2 N.m (18 lb in).

  3. Connect the electrical connector (2) to the outside ambient air temperature sensor.
    Fig 1: Installing Outside Ambient Air Temperature Sensor & Radiator Support Bolt
    G01813367Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals