Symptoms - Instrument Panel, Gages and Console: Notes

Important:  The following steps must be completed before using the symptom tables.

1. Perform Diagnostic System Check - Instrument Cluster  or Diagnostic System Check - Driver Information Systems  before using the symptom table in order to verify that all of the following are true:
   • There are no DTCs set.
   • The module(s) can communicate via the serial data link.
2. Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
   • Instrument Panel Cluster (IPC) Description and Operation 
   • Indicator/Warning Message Description and Operation 
   • Driver Information Center (DIC) Description and Operation 
   • Audible Warnings Description and Operation