LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Rotor >> Removal

Rear Brake Rotor: Removal

  1. Raise and support the vehicle. Remove the tire and wheel.
  2. Install a C-clamp over the top of the brake caliper and against the back of the outboard brake pad. Tighten the C-clamp until the brake caliper piston pushes into the brake caliper bore enough to slide the brake caliper off of the rotor. Remove the C-clamp from the brake caliper.
  3. Remove the brake caliper bracket with the brake caliper leaving the hydraulic flex hose connected. Use a strap or heavy gage wire in order to support the brake caliper and the brake caliper bracket. Remove the brake rotor.
scientia non olet · About LEMON Manuals