Park Brake Warning Lamp Switch: Installation

Install the park brake indicator switch. Install the park brake indicator switch screw. Tighten the screw to specifications. See TORQUE SPECIFICATIONS  . Install the park brake indicator switch electrical connector. Install the left-side carpet retainer. Install the left-side instrument panel insulator.

1. Snap the I/P courtesy lamp into the I/P insulator.
2. Position the I/P insulator to the instrument panel.
3. Install the push-in retainers to the I/P insulator to instrument panel.
4. Install the press-on retainers to the I/P insulator to dash mat.