LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Disconnect the electrical connector from the brake fluid level sensor. Disconnect the brake pipes from the master cylinder. Install a rubber cap or plug to the exposed brake pipe fitting ends in order to prevent brake fluid loss and contamination.
  2. Remove master cylinder mounting nuts. Remove the master cylinder from the vehicle. Drain the master cylinder reservoir of all brake fluid.
scientia non olet · About LEMON Manuals