LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Drum Brake Adjusting Hardware >> Removal

Drum Brake Adjusting Hardware: Removal

  1. Raise and support the vehicle. Remove the rear wheel and tire. Remove the brake drum.
  2. Remove the adjuster spring from the adjuster actuator lever. See Figure . Remove the straight end of the adjuster actuator spring from the brake shoe. Remove the adjuster actuator lever.