Disc Brake Specifications

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Front Brakes

Rotor Diameter

10.945 (278)

Rotor Discard Thickness ⁽¹⁾

1.21 (30.7)

Rotor Maximum Lateral Runout

.002 (.06)

Rotor Maximum Scoring

.059 (1.50)

Rotor Maximum Thickness Variation

.001 (.025)

Rotor Minimum Thickness After Refinish

1.25 (31.7)

Rotor Minimum Wear Stock

.039 (1.0)

Rotor Thickness (New)

1.27 (32.2)

Rear Brakes

Rotor Diameter

10.945 (278)

Rotor Discard Thickness ⁽¹⁾

.35 (9.0)

Rotor Maximum Lateral Runout

.002 (.06)

Rotor Maximum Scoring

.059 (1.50)

Rotor Maximum Thickness Variation

.001 (.025)

Rotor Minimum Thickness After Refinish

.42 (10.6)

Rotor Minimum Wear Stock

.06 (1.6)

Rotor Thickness (New)

.43 (11.0)

⁽¹⁾	All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness after refinish specifications.