LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Stoplight Switch >> Installation

Stoplight Switch: Installation

  1. Install the electrical connector on the stoplight switch (1). See Fig 1 .
  2. Position the stoplight switch (1) on the pushrod (2) and install on the brake pedal pin. See Fig 1 .
  3. Install the pushrod retainer (3) to the brake pedal pin (4). The retainer will snap into place. See Fig 1 .
    Fig 1: Exploded View Of Stoplight Switch
    G00083431Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals