LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Installation

Master Cylinder: Installation

  1. Before installing the master cylinder, bench bleed the master cylinder. See MASTER CYLINDER BENCH BLEEDING  under BLEEDING, FILLING & FLUSHING BRAKE SYSTEM.
  2. Install the master cylinder assembly.
  3. Install the master cylinder mounting nuts. Tighten the master cylinder mounting nuts. See TORQUE SPECIFICATIONS  .
  4. Connect the brake pipes. See Figure . Tighten the brake pipe fittings. See TORQUE SPECIFICATIONS  .
  5. Connect the master cylinder fluid level sensor connector.
  6. Bleed the hydraulic brakes system. See MANUAL BLEEDING  under BLEEDING, FILLING & FLUSHING BRAKE SYSTEM.
scientia non olet · About LEMON Manuals