LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Disc Brake Splash Shield >> Installation

Front Disc Brake Splash Shield: Installation

  1. Install the splash shield.
  2. Install the splash shield retaining bolts, same as wheel hub and bearing.
  3. Install the front hub and bearing assembly. See WHEEL HUB, BEARING, AND SEAL REPLACEMENT in appropriate FRONT SUSPENSION article.
  4. Install the tire and wheel assembly. Lower the vehicle.
scientia non olet · About LEMON Manuals