LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Caliper >> Removal

Front Brake Caliper: Removal

  1. Raise the vehicle. Remove the tire and wheel assembly.
  2. Remove the front brake hose bolt. See Fig 1 .
  3. Install a plug in the front brake caliper hose in order to prevent excessive brake fluid loss and contamination.
  4. Discard the metal/copper gaskets. DO NOT reuse them replace with NEW metal/copper gaskets.
  5. Remove the front brake caliper guide pin bolts. See Figure .
  6. Remove the front brake caliper from the mounting bracket.
Fig 1: Identifying Front Brake Hose Bolt
G00307598Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals