Brake Specifications
DISC BRAKE SPECIFICATIONS
| Application |
In. (mm) |
| Front Brakes |
| Rotor |
| Discard Thickness |
1.08 (27.5) |
| Minimum Allowable Thickness After Refinish |
1.13 (28.8) |
| Thickness (New) |
1.14 (29.0) |
| Maximum Allowable Lateral Runout |
0.002 (0.051) |
| Maximum Allowable Scoring |
0.059 (1.50) |
| Maximum Allowable thickness Variation |
0.001 (0.025) |
| Rear Brakes |
| Rotor |
| Discard Thickness |
0.728 (18.50) |
| Minimum Allowable Thickness After Refinish |
0.735 (19.64) |
| Thickness (New) |
0.787 (20.0) |
| Maximum Allowable Lateral Runout |
0.002 (0.051) |
| Maximum Allowable Scoring |
0.059 (1.50) |
| Maximum Allowable thickness Variation |
0.001 (0.025) |
HYDRAULIC BRAKE SPECIFICATIONS
| Application |
Specification |
| Pressure Modulator Bleeder Valves |
80 In. Lbs. (9 N.m) |
| Caliper Bleeder Valve, Front |
115 In. Lbs. (13 N.m) |
| Caliper Bleeder Valve, Rear |
97 In. Lbs. (11 N.m) |
| Brake System Flushing |
| Brake Fluid Volume From Brake Pressure Modulator Bleeder Valves |
4 oz. (118 ml) |
| Fluid Volume From Brake Calipers |
8 oz. (235 ml) |
| Brake System Pressure Bleed |
| Initial Pressure Adjustment Setting, Leak Testing Hydraulic Brake System |
10 Psi (70 kPa) |
| Pressure Bleed Procedure Setting |
35 Psi (240 kPa) |
| Brake Pedal Maximum Travel |
| Vacuum Power Assist |
2.4 In. (61 mm) |