LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory Left >> Installation Procedure

Installation Procedure

  1. Install the headlamp trim plate to the IP, ensuring the retaining clips are fully seated.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 2 headlamp trim plate retaining screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

    Fig 1: Removing/Installing Headlamp Trim Plate & Retaining Nuts
    GM712835Courtesy of GENERAL MOTORS CORP.
  3. Install the knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster .
  4. Install the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
scientia non olet · About LEMON Manuals