LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Bracket Replacement - Console Floor >> Removal Procedure

Removal Procedure

  1. Block the wheels to prevent the vehicle from moving.
  2. Remove the floor shift control knob. Refer to FLOOR SHIFT KNOB .
  3. Remove the center console. Console Replacement 
  4. Disconnect the automatic transmission range selector cable. Refer to FLOOR SHIFT CONTROL CABLE .
  5. Disconnect the electrical connector from the automatic transmission shift interlock solenoid.
  6. Disconnect the electrical connector from the park brake.
  7. Remove the console bracket from the vehicle, by removing the retaining nuts (1) from the center instrument panel (IP) bracket.
    Fig 1: Identifying Console Floor Bracket
    GM741605Courtesy of GENERAL MOTORS CORP.
  8. Remove the forward retaining screw, if equipped.
  9. Remove the remaining fasteners from the console bracket.
  10. Remove the console bracket from the vehicle.
  11. Remove the floor shift control. Refer to FLOOR SHIFT CONTROL ASSEMBLY .
scientia non olet · About LEMON Manuals