LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Caliper Bracket >> Removal

Rear Brake Caliper Bracket: Removal

  1. Raise the vehicle. Remove the tire and wheel assembly.
  2. Inspect the brake caliper assembly. See BRAKE CALIPER  under ADJUSTMENTS & INSPECTIONS.
  3. Remove the rear brake caliper assembly, relocate the brake caliper to the side. See REAR BRAKE CALIPER  .
  4. Inspect the brake pads. See BRAKE PAD INSPECTION  in DISC BRAKE SYSTEM under TROUBLE SHOOTING.
  5. Remove the front brake pads from the mounting bracket.
  6. Inspect the brake hardware. See FRONT DISC BRAKE MOUNTING & HARDWARE INSPECTION  in DISC BRAKE SYSTEM under TROUBLE SHOOTING.
  7. Remove the brake pad retaining clips from the mounting bracket.
  8. Remove the brake caliper mounting bracket retaining bolts.
  9. Remove the brake caliper mounting bracket.
  10. Remove the guide pin seals from the brake caliper mounting bracket.
  11. Inspect the brake rotor. See BRAKE ROTOR SURFACE & WEAR INSPECTION  in DISC BRAKE SYSTEM under TROUBLE SHOOTING.
scientia non olet · About LEMON Manuals