LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Power Brake Booster >> Installation

Power Brake Booster: Installation

  1. Install the gasket and the vacuum booster assembly.
  2. Install the vacuum booster mounting nuts on the vacuum booster. Tighten the vacuum booster mounting nuts. See TORQUE SPECIFICATIONS  .
  3. Position the stoplight switch (1) on the pushrod (2) and install on the brake pedal pin. See Figure .
  4. Install the pushrod retainer (3) to the brake pedal pin (4). The retainer will snap into place. See Figure .
  5. Install the left closeout/insulator panel.
  6. Install the vacuum hose to the vacuum booster and to the engine.
  7. Install the master cylinder. See MASTER CYLINDER  .
scientia non olet · About LEMON Manuals