LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Removal Procedure

Removal Procedure

  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Remove the 4 trim panel retaining screws.
    Fig 1: Locating Knee Bolster Trim Panel & Screws
    GM712827Courtesy of GENERAL MOTORS CORP.
  3. Release the clips that retain the trim panel to the IP.
  4. Remove the trim panel from the IP.