LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> TrailBlazer 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Installation Procedure

Installation Procedure

  1. Position the trim panel to the IP.
  2. Seat the clips that retain the trim panel to the IP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the 4 trim panel retaining screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

    Fig 1: Locating Knee Bolster Trim Panel & Screws
    GM712827Courtesy of GENERAL MOTORS CORP.
  4. Install the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
scientia non olet · About LEMON Manuals