LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Stoplight Switch >> Removal & Installation

Removal & Installation

  1. Disconnect the stoplight switch connector. Remove the stoplight switch nut and the stoplight switch.
    2. CAUTION: DO NOT tighten the stoplight switch nut before adjusting the stoplight switch.
  2. Install the stoplight switch to the bracket. Secure with the nut. Connect the stoplight switch connector.
  3. Adjust the stoplight switch. See STOPLIGHT SWITCH ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS.
scientia non olet · About LEMON Manuals