LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Power Brake Booster >> Installation (ABS)

Installation (ABS)

  1. Apply Wheel Bearing Lubricant, (1051344 US; 993037 Canada), or the equivalent, to the master cylinder piston.
  2. Install the booster to the bulkhead.
  3. Install, but DO NOT tighten the 4 brake booster nuts. See Figure . Connect the booster push rod clevis to the brake pedal lever. Secure the clevis with the clevis pin and the clip.
  4. Install the push rod clevis to specified measurement. See DISTANCE MEASUREMENT  .
  5. Tighten the clevis nut to specification. See TORQUE SPECIFICATIONS  .
  6. Tighten the booster nuts to specification. See TORQUE SPECIFICATIONS  .
  7. Connect the vacuum hose to the brake booster. Secure the hose with the hose clamp. Install the master cylinder. See MASTER CYLINDER  .
scientia non olet · About LEMON Manuals