LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing IP Steering Column Opening Trim Plate
    GM477508Courtesy of GENERAL MOTORS CORP.
  1. Remove the following components from the instrument panel:
    1. The 3 screws (2)
    2. The IP steering column opening trim plate (1)
    2. Fig 2: Removing Driver's Knee Bolster Panel
    GM477550Courtesy of GENERAL MOTORS CORP.
  2. Remove the following components from the vehicle:
    1. The 4 bolts (1 or 4)
    2. The IP drivers knee bolster panel (2 or 3)
scientia non olet · About LEMON Manuals