Chime Always On
Chime Always On
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: WARNING SYSTEMS | |||
| 1 | Did you review the Audible Warning Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Instrument Panel, Gages and Console |
| 2 | Verify that the chime is always on. Does the system operate normally? |
Go to TESTING FOR INTERMITTENT AND POOR CONNECTIONS | Go to Step 3 |
| 3 | Remove the door jamb switch connector. Does the audible warning remain ON? |
Go to Step 5 | Go to Step 4 |
| 4 | Replace the LH front door jamb switch. Refer to DOOR JAMB SWITCH REPLACEMENT - FRONT (4 DOOR)DOOR JAMB SWITCH REPLACEMENT - FRONT (2 DOOR)
in Lighting Systems. Did you complete the repair? |
Go to Step 8 | - |
| 5 |
|
Go to Step 6 | Go to Step 7 |
| 6 | Replace the ignition switch. Is the repair complete? |
Go to Step 8 | - |
| 7 | Replace the multifunction alarm module. Refer to Multifunction Alarm Module Replacement . Is the repair complete? |
Go to Step 8 | - |
| 8 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |