LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Pedal >> Removal (Manual Transmission)

Removal (Manual Transmission)

  1. Disconnect the manual transmission clutch start switch. See Fig 1 .
  2. Disconnect the release clutch pedal position switch.
  3. Disconnect the stoplight switch.
  4. Remove the clutch master cylinder push rod clevis retainer.
  5. Remove the clutch master cylinder push rod clevis pin.
  6. Remove the brake pedal push rod clevis retainer.
  7. Remove the brake pedal push rod clevis pin.
  8. Remove the 3 bolts at the top of the clutch pedal bracket.
  9. Remove the 4 nuts at the bottom of the clutch pedal bracket.
  10. Remove the clutch pedal return spring from the brake pedal bracket.
  11. Remove the clutch/brake pedal bracket assembly from the vehicle.
Fig 1: Identifying Brake Pedal Assembly (Manual Transmission)
G00284641Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals