LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing Instrument Panel Cluster
    GM477548Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to BATTERY DISCONNECT CAUTION .
  1. Disconnect the negative battery cable.
  2. Remove the IP cluster trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster .
  3. Remove the 4 screws (1) which secure the instrument cluster (2).
    4. Fig 2: Disconnecting Instrument Cluster Connectors
    GM477549Courtesy of GENERAL MOTORS CORP.
  4. Pull the cluster (1) forward in order to gain access to the electrical connectors (2).
  5. Disconnect the 3 instrument cluster electrical connectors (2).
  6. Remove the instrument cluster (1) from the vehicle.
scientia non olet · About LEMON Manuals