LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Fuel/Temperature Gage Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing Fuel/Temperature Gauge
    GM478155Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel/temperature gage to the instrument cluster (2). Secure the gage with the 6 screws (5).
    2. Fig 2: Engaging Instrument Cluster Bezel Assembly Tabs
    GM478152Courtesy of GENERAL MOTORS CORP.
  2. Install the instrument cluster lens and bezel assembly (2) to the instrument cluster (1). Ensure that the plastic retaining tabs are fully engaged.
  3. Install the instrument cluster. Refer to Instrument Panel Cluster (IPC) Replacement .
scientia non olet · About LEMON Manuals