LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Vacuum Brake Booster Replacement >> Installation Procedure

Installation Procedure

  1. Install the gasket to the booster.
  2. Install the vacuum booster.
  3. Install the 4 vacuum booster mounting nuts. Tighten the nuts to 36 N.m (27 lb ft).
  4. Install the pushrod (3) and the stop lamp switch (2) to the brake pedal stud (1).
  5. Install the pushrod retaining clip (4) to the brake pedal stud (1).
  6. Install the vacuum hose to the brake booster check valve.
  7. Install the master cylinder. Refer to Master Cylinder Replacement (Vacuum Boost)  or Master Cylinder Replacement (Hydraulic Boost)  .
  8. Release the park brake and unblock the wheels.
scientia non olet · About LEMON Manuals