LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes (Cab & Chassis, & Hd) >> Removal & Installation >> Master Cylinder Reservoir >> Removal

Master Cylinder Reservoir: Removal

  1. Remove the master cylinder from the vehicle. See Fig 1 . See MASTER CYLINDER  .
  2. Drain the brake fluid from the reservoir.
  3. Secure the master cylinder in a vise. Do not clamp the master cylinder body, secure only the flange.
  4. Remove the reservoir body by pulling the body straight up and away from the cylinder body. See Fig 2 .
  5. Remove the seals from the reservoir.
Fig 1: Removing Master Cylinder
G00317536Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Reservoir Body
G00317537Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals