LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes (Cab & Chassis, & Hd) >> Removal & Installation >> Hydraulic Brake Booster Accumulator >> Installation

Hydraulic Brake Booster Accumulator: Installation

  1. Lubricate all seals and metal friction points with power steering fluid.
  2. Install the accumulator and "O" ring seal. See Figure .
  3. Place the accumulator piston compressor over the end of the accumulator. See Figure .
  4. Install the nut on the stud.
  5. Depress the accumulator with a C-clamp.
  6. Install the accumulator retainer ring. See Figure .
  7. Release the C-clamp. See Figure .
  8. Remove the nut from the stud.
  9. Remove the accumulator piston compressor.
  10. Install the master cylinder. See Figure . See MASTER CYLINDER  .
scientia non olet · About LEMON Manuals