LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Hydraulic Brake Booster Accumulator Replacement >> Installation Procedure

Installation Procedure

  1. Lubricate all of the seals and the metal friction points with power steering fluid.
  2. Install the accumulator (2) and the O-ring seal (3).
  3. Place the J 26889  over the end of the accumulator.
  4. Install the nut on the stud.
  5. Depress the accumulator with a C-clamp.
  6. Install the accumulator retainer ring (1).
  7. Release the C-clamp.
  8. Remove the nut from the stud.
  9. Remove the J 26889  .
  10. Install the master cylinder to the hydraulic booster. Refer to Master Cylinder Replacement (Vacuum Boost)  or Master Cylinder Replacement (Hydraulic Boost)  .
  11. Release the park brake and unblock the wheels.
scientia non olet · About LEMON Manuals