LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes (Except Cab & Chassis, & Hd) >> Repair Instructions >> Parking Brake Shoe Replacement (RPO NYS - Rear Wheel Steering) >> Installation Procedure

Installation Procedure

  1. Install the park brake shoe to the actuator
  2. Install the park brake shoe retaining clip and retaining clip bolt. Tighten the bolt to 3 N.m (25 lb in).
  3. Install the park brake assembly and backing plate to the steering knuckle
  4. Install the wheel bearing. Refer to WHEEL HUB & BEARING REPLACEMENT in Rear Wheel Steering
    5. Fig 1: View Of Park Brake Cable To Park Brake Actuator Lever
    GM791352
  5. Install the park brake cable to the park brake actuator lever
    6. Fig 2: Identifying Rear Park Brake Bracket Bolt
    GM791353
  6. Install the rear park brake bracket bolt. Tighten the bolt to 61 N.m (45 lb ft).
    7. Fig 3: Equalizer Bar & Park Brake Cable - Rear
    GM791349
  7. Install the park brake cable to the equalizer bar.
  8. Adjust the park brake shoe. Refer to Parking Brake Adjustment 
  9. Install the tire and wheel assembly
  10. Lower the vehicle
scientia non olet · About LEMON Manuals