LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes (Except Cab & Chassis, & Hd) >> Repair Instructions >> Front Brake Shield Replacement >> Installation Procedure

Installation Procedure

Fig 1: Splash Shield (15 Series)
GM371033
  1. Install the splash shield (15 series).
    2. Fig 2: Splash Shield (25/35 Series)
    GM371077
  2. Install the splash shield (25/35 series).
  3. Install the hub and bearing assembly. Refer to WHEEL HUB, BEARING & SEAL REPLACEMENT (RWD) or WHEEL HUB, BEARING & SEAL REPLACEMENT (4WD) in Front Suspension
  4. Install the tire and wheel assembly
  5. Remove the safety stands
  6. Lower the vehicle
scientia non olet · About LEMON Manuals