LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Prizm LSi, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Hose Replacement - Rear >> Installation Procedure

Installation Procedure

  1. Install the rear brake hose. Secure with the rear brake hose retaining clips.
  2. Install the rear brake hose to the rear wheel cylinder brake pipe.
  3. Install the rear brake hose to the rear brake pipe.
  4. Bleed the brake system.

    Refer to Hydraulic Brake System Bleeding .

  5. Install the rear tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals