LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Prizm Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Panel Replacement - IP Cluster (Standard Column) >> Removal Procedure

Removal Procedure

  1. Disable the SIR System. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .

    Important:  It is not necessary to remove the steering wheel to access the lower trim cover screws. The screws can be easily accessed by rotating the steering wheel.

  2. Remove the following components from the steering column:
    • The lower trim cover screw
    • The 2 lower trim cover screws (2) that are located beneath the steering wheel (1).
      Fig 1: Removing 2 Lower Trim Cover Screws
      G01639967Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering column lower trim cover (6).
    Fig 2: Removing Steering Column Lower Trim Cover
    G01639968Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the steering column:
    • The steering column upper trim cover screw (3)
    • The steering column upper trim cover (2)
      Fig 3: Removing Steering Column Upper Trim Cover Screw
      G01639969Courtesy of GENERAL MOTORS CORP.
  5. Remove the 2 screws which secure the IP cluster trim plate (2).
  6. Disengage the 2 lower clips (1).
  7. Gently remove the cluster trim plate (2) from the instrument panel assembly.
    Fig 4: Removing 2 Screws Which Secure The IP Cluster Trim Plate
    G01639970Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals