Removal Procedure
- Remove the instrument panel ashtray from the instrument panel ashtray housing by depressing the spring loaded tab and pulling rearward.
- Using a taped flat bladed tool, gently pry and release the 6 retaining clips which secure the IP accessory center trim plate (1) to the instrument panel assembly.
- Disconnect the following components:
- The 2 cigar lighter electrical connectors
- The instrument panel ashtray bulb socket
- Remove the cigar lighter assembly, if necessary. Refer to Cigar Lighter Replacement .
- Remove the instrument panel ashtray housing, if necessary.
Courtesy of GENERAL MOTORS CORP.