Installation Procedure

Important:  Apply Lubriplate® GM P/N 1050109 white lithium grease, or the equivalent, to all of the brake component metal contact points (where the brake shoe metal contacts the backing plate, the wheel cylinder and the adjustment strut, etc.) prior to installation.

1. Install the drum brake hardware components (1-18).
2. Install the brake shoes (6,14). Refer to Brake Shoe Replacement .
3. Install the drum. Refer to Brake Drum Replacement .
   Fig 1: Installing Brake Shoes And Drum Brake Hardware Components

   Courtesy of GENERAL MOTORS CORP.