LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Prizm Base, Automatic, A131L/MB3 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Temperature Gage Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument cluster retainer. Refer to BEZEL REPLACEMENT - IP Cluster .

    Important:  Do not remove the needle from the temperature gauge. There is no detent or flat spot on the shaft in order to indicate the correct placement.

  2. Remove the 3 screws (4) which secure the temperature gauge to the instrument cluster case.
    Fig 1: Removing 3 Screws Securing Temperature Gauge
    G01640010Courtesy of GENERAL MOTORS CORP.
  3. Remove the temperature gauge (4) from the instrument cluster case.
    Fig 2: Removing Temperature Gauge From Instrument Cluster Case
    G01640011Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals