LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Monte Carlo SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 567 (Engine Mechanical - 3.4L V6 - VIN (E) (La1)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Front Oil Seal Installation

Crankshaft Front Oil Seal Installation

WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required 

J 35468  Cover Aligner and Seal Installer. See Special Tools .

    Fig 1: Installing Crankshaft Front Oil Seal
    GM187026Courtesy of GENERAL MOTORS CORP.
  1. Align the J 35468  and the crankshaft front oil seal with the engine front cover and crankshaft. See Special Tools .
  2. Install the crankshaft front oil seal using the J 35468  and a suitable tool. See Special Tools .
scientia non olet · About LEMON Manuals