LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.4L V6 - VIN (E) (On-Vehicle) >> Repair Instructions >> Oil Level Indicator & Tube Replacement >> Installation Procedure

Installation Procedure

  1. Clean the oil level indicator tube.
  2. Apply sealant around the oil level indicator tube 12.7 mm (0.50 in) below the bead. Use GM sealant P/N 12345739 or the equivalent.
  3. Install the oil level indicator tube into the engine block.
  4. Install the bolt to the oil level indicator tube bracket.
  5. Install the oil level indicator tube bolt. Tighten the bolt to 25 N.m (18 ft lbs).
  6. Install the oil level indicator.
  7. Install the number 6 spark plug wire to the spark plug.
scientia non olet · About LEMON Manuals