LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.4L V6 - VIN (E) (On-Vehicle) >> Repair Instructions >> Engine Oil Pressure Sensor And/Or Switch Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle.
  2. Disconnect the engine oil pressure switch electrical connector.
  3. Remove the oil pressure switch.
    Fig 1: Oil Pressure Switch
    G01806810Courtesy of GENERAL MOTORS CORP.