LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.4L V6 - VIN (E) (On-Vehicle) >> Repair Instructions >> Engine Oil Pressure Sensor And/Or Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the engine oil pressure switch. Tighten the switch to 16 N.m (12 ft lbs)
  2. Connect the engine oil pressure switch electrical connector.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals